No products in the cart.
Hexcore – Honeycomb Fins | Tri Set
The Culprit Hexcore RTM honeycomb fins have a cutting edge foil design and an excellent balance of base, length, height and sweep producing a fin with good drive, outstanding grip and optimum maneuverability. The combination of our innovative foil design and our light weight foam core leaves you with a high performance fin that is the best value performance fin series on the market. Check out the competitive advantages the Culprit Hexcore fins have to offer over all other honeycomb fins. Available in 4 sizes.
Culprit Hexcore RTM Honeycomb Surfboard Fins
C1: Height 4.25″ Base 4.13″ (108mm*105mm) Sweep 31o
C2: Height 4.25″ Base 4.21″ (108mm*107mm) Sweep 33o
C3: Height 4.56″ Base 4.25″ (112mm*108mm) Sweep 33o
C4: Height: 4.68″ Base: 4.56″(119mm*112mm) Sweep 33o
Ideal surfer weight range:
C1:Up to 121 lbs (55Kg)
C2:121lbs-154 lbs (55-70Kg)
C3:143 lbs-175 lbs (65-80Kg)
C4:165 lbs+ (75Kg)
Blue, Orange, Green, Clear, Red & Smoke
Design’s are similar to FCS “M” series
Set of three (3) fins
Light weight foam core = reduced weight
Foil Design: Medium Base = good drive, Height = good grip, Low Sweep = good maneuverability
High performance fins require the right ratio of weight to stiffness to ensure optimum performance, a lot of fins on the market have either solely fiberglass constructions or poorly weighted fins with use of excess resin and glass.
Light Weight Foam Core
Culprit Surf utilizes a precision vacuum bag process to seal our light weight foam core to optimize the weight and hence performance of the fins.
Laminated fiberglass for a super stiff construction
The use of too much glass in the fin results in too much weight. The use of too little glass reduces the stiffness and strength and negatively affects the flex pattern and thus performance of your fins. Culprit ensures high quality materials and precision fiberglass placement using a laminated fiberglass construction process to yield the optimum strength and weight for our fins.